As we all known, the price of a rotary heat press calender always is expensive, which is a high grade heat transfer printing equipment that plays an important role in the process of sublimation printing, so we need to pay attention to maintain it correctly. Today’s article will share you how to maintain a calender. 🙂
1. Remember to keep your heat press clean, this is basic, and also important.
2. Check every part of the heat transfer machine regularly to make sure they can work normally.
3. Each time before you start operating, remember the machine must be refueling according to the rules.
4. The roller heat press machine on the gas source processor, should close the gas 2 times a day; aerosol oil, adjusted to 4-5 drops per minute, and in the refueling to gas.
5. Joint head: drops of butter (a week / time, 10-20g), oil (1-2 drops, 3 days / times).
6. Be careful when pressing the emergency stop button. Often use this button is harmful for the chain, towline and the belt.
7. Sometimes the optical axis will drop oil twice a week. The best method to avoid this situation is using the good quality media.
8. When cleaning of the table glue, we should avoid table adhesive to the end of the wheel. If you find that the end of the wheel sticky plastic, dry wipe it, or it will influence the transfer printing result.
Our company, Sublicalender, is a machine manufacturer with over 10 years of experience producing rotary heat press calender. Our team utilizes the knowledge and experience obtained through years of involvement and puts it into research & development, innovation and design. We are supplier of other material of sublimation transfer printing as well. Any question, please contact us,?we will provide you the best service. Today’s share is here, thank you for your reading and have a nice weekend! 🙂
