A wide format heat press machine is the heart of our dye sublimation printing business. We should always take care of it if we want it to give you the best at all times. The heart press requires some maintenance to run efficiently, just like any other machine, And these maintenance checks should be conducted at regular intervals for an efficiently running machine. Note that proper maintenance will extend the lifespan of our heat press machine.
1. Dust Heat Press Regular
Built up dust can make the machine run hotter. Therefore, keep dust off both the exterior and interior components of our heat press calender.
2. Lubricate Heat Press Machine
Apply high heat and extreme pressure lubricant or a white grease to the pistons and rods of our heat transfer machine with a cotton swab or a rag. It will help the lowering and lifting of the platens become a smoother motion. We should only need to do this about once a year. Of course, it’s okay to do it more than once a year.
3. Minimum Use Emergency Stop Switch
During the use of the process, the emergency stop switch, on roller heat press machine should to minimum use to avoid shortening the life of the chain, towline, belt.
4. Check Machine regular
Please often check the roller heat press machine safety valve, bearings, transmission parts to make sure the action sensitive and reliable.
5. Refuel Heat Transfer Machine Before Operating
Each time before operating, roller heat transfer machine on the activities of the site must be refueling according to the rules.
Our company can supply for all sizes of wide format heat press machine and materials of sublimation printing, such as sublimation transfer paper, sublimation ink…and so on. Any question, please contact us, our team will provide excellent goods with superior customer service for you. Thank you for your reading. 🙂
Wide format heat press machine, also known as roller heating machine, is used to transfer dye-sublimation prints onto a fabric. Heat tube is a very important part of the machine. But, do you know how to replace heating tube of the machine? This article will introduce steps.
1. Open manhole on both ends of the calender heat press.
2.Loosen heating tube screw machine copper connections.
3.Draw out heating tube of the rotary heat press machine.
4.Check new heating pipe ends are tight insulation ceramics.
5.Insert new heating pipes, heating tube ends and check out the distance of the cylinder is consistent.
6.Fixed the heating pipes, in making ceramics, copper and connected.
7.Above steps needed to change in turn with heating tube.
8.Replace all hair after heat pipe, check again for all the screws are tight.
Warning when we are replacing the heat tube:
1.Machine drum are high temperature, do not touch, in case of scald!
2.Machine operation process, the workbench please avoid placing any sundry, lest enter roller, damage the machine!
3.Around the the roller heating machine should avoid pile up any flammable items.
4.Specially trained personnel electrician to repair the wide format heat press machine.
FY Series Roller –type sublimation thermal transfer printing equipment, the use of heat-conducting oil layer surrounding electric heating diversion of the principles of design and manufacture of heating, the cylinder surface temperature balanced and stable blanket with out of the mechanical structure, with three-phase frequency control devices, machine operation, easy maintenance, transfer to achieve the best and widely used in digital printing industry at home and abroad. Sublistar is a roller heat press machine manufacturer with over 10 years of experience producing heat transfer machine. Any question or need, please contact us. Our team will provide you with the best service. Thank you for your reading.