Nowadays in the sublimation printing industry, science and technology are getting more and more new. Everyone’s ability to innovate is also constantly increasing. The emergence of more printing machine equipment perfectly meets the hot demand of the current market, and the Roll Type Sublimation Calender Machine is one of these. Printing equipment.
First, open the switch, press the main power button, the power indicator light, turn on the heating switch, the temperature controller green light, the machine began to warm.
Second, the temperature setting
1. Check the dial setting before starting each time to prevent artificial setting too high and burn the blanket
2. Put the dial coder below the temperature controller at 250°C, and the small green light will start to automatically control the temperature.
3. When the temperature display reaches about 250°C, the red light indicates that the operating temperature has been reached and the transfer can be performed.
4. Turn on the motor switch and turn it forward to turn the speed control knob slowly from left to right to the proper speed.
5. If the temperature is too low during the transfer, set the temperature to a higher level and vice versa.
Fourth, power off treatment: In order to ensure the transfer of finished products, please turn the motor belt pulley after power off, this time can still be transferred, the effect is the same (pay attention to the same speed).
Fifth, in order to ensure the service life of the transfer blanket, after each transfer is completed, the dial driver is adjusted to below 95°C, and the machine continues to rotate until the display temperature drops below 100°C.
Okay, these all above are my share about the tricks of using Roll Type Heat Transfer Machine. If you have any other needs or questions welcome to contact us at any time. We will provide you the best quality product and service. Hope my article can be useful to you. Thank you for your reading.