• 86-15850596034
  • feiyuedigitalinc@gmail.com

Tag Archive roller heat transfer printing machine

How To Extend The life Of The Blanket Of Roller Heat Transfer Printing Machine?

The quality of the blanket of roller heat transfer printing machine affects the quality and effect of the transfer. The blanket, as an important component of the roller printing machine, is not the body of the diamond, and the life of our blanket is usually about 2 years. However, the improper deformation of the worker often causes the felt to become deformed, dirty, burnt or burnt. Here’re some advices for extend the life of the blanket of roller heat transfer machine.

1.Before shipment, we will thermostat the felt to extend the life of the blanket.

2.Special attention should be given to the maintenance of the blanket when the roller printing machine is installed and the precautions for the operation of the machine.

3.It is recommended that the customer’s factory is equipped with a master who specializes in operating the machine. Usually, he is responsible for the maintenance and care of the machine.

We Feiyue uses DuPont raw materials for blankets made of special materials to withstand high temperatures up to 250 ° C, alkali, acid and chemical resistant. We mainly manages sublimation paper, inkjet printer, digital printing inks, calendering machines and accessories. If you are interested in our products, please feel free to contact us.

What are the advantages of calender heat press in nylon printing industry?

Nylon cloth printing is not as common as cotton, terylene and other bulk textile printing in silk screen printing, but it is also a relatively common content of fabric printing. Nylon cloth is often used to make all kinds of travel bags, clothing, poncho, household appliances and equipment covers, advertising banners and some advertising. In nylon printing, not only clear patterns and bright colors are required, but the most important thing is to ensure the fastness of the printing to meet the requirements, and the fastness of the printing is also the quality problem that must be paid special attention to in nylon printing.

Due to low thermal plasticity, most manufacturers use acid dyestuff to color nylon fabric through the process of screen printing. However, nylon fabric after screen printing, such as soaping color fastness, washing color fastness, sun color fastness, perspiration color fastness, etc., is always unsatisfactory, unable to break through grade 4. The breakthrough point of color fastness of nylon printing fabric has been a problem solved by textile technology.

FeiYue printing machinery has been focusing on the research, development and production of printing machines for more than 10 years. It has passed various tests for the nylon printing process, mastered the technical core, and completely solved the nylon thermal transfer printing process. In the fabric application, also from the 15D nylon fabric to nylon Oxford fabric can be produced.

The transfer effect of using FeiYue roller transfer printing machine has three characteristics:

1. The pattern of transfer printing fabric (fabric) is characterized by vivid patterns, detailed patterns, clear levels and strong three-dimensional sense. Transfer printing can print natural scenery and artistic patterns.

2. After the transfer printing, it can be packaged and delivered without post-treatment, featuring short production cycle and high production efficiency.

3. Transfer printing fabrics (fabrics) do not have environmental pollution problems. Due to dry processing, there is no water washing, evaporation, drying and other processes, no waste gas and waste water discharge.

More info:
Website: www.sublicalender.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Address: Central Road 323, Nanjing, Jiangsu, China

What are the supporting materials for roller drum heat transfer machine?

Introduction of materials for roller drum heat transfer machine.

Heat transfer off type substrate, paper (light, matte)

Release film or paper (coated with release agent) can be used directly, screen printing, offset printing, gravure. When using offset printing, please note: the universal offset printing ink needs to be permeated and dried, which cannot be printed directly on the release film, and a suitable gloss oil needs to be covered when printing (it is recommended to add wax paste, silicon powder, etc.). Offset printing ink directly to do the color fastness, after the transfer of color, can not meet the requirements of washable clothing. Transfer, when the temperature falls below the melting point of the ink before peeling. Peeling effect is best when cold tear is completed.

With high elastic transfer ink

Good adhesion, anti-fading, elastic, using 200 mesh -300 mesh, white screen used 180-200 mesh. Opening agent for solvent, 783.

Hot melt glue

Hot melt adhesive is suitable for cotton cloth, nylon cloth, chemical fiber cloth, for the spot ink transfer substrate adhesion, soft feel. Suitable hot temperature: nylon fabric 120 ℃ to 130 ℃, the swimsuit cloth 140 ℃ to 150 ℃, 150 ℃ to 160 ℃, cotton cloth hot stamping 6 to 8 seconds. With spot ink, screen printing 80-100 mesh, dilute solvent used ring has ketone, opening agent.

Hot transfer printing hot melt powder

Heat transfer printing hot melt powder has high bonding strength. Washable; Do not affect ink color; This product is harmless to human body and environment. It is a new kind of environmental protection material, suitable for various kinds of textiles. Transfer printing of leather, paper, wood and other materials.

Purpose: 1. Thermal transfer printing; 2. Make printing paste; 3. Screen printing; 4. Bronzing flocking printing; Make hot sols

Heat transfer release agent

Heat transfer release agent is suitable for stamping, heat transfer printing film, heat transfer label and so on. According to different properties, it can be divided into two types: cold tear release agent and hot and cold release agent. Cold tear release agent: the release film is transparent color with high gloss on the parting surface. The release film is transferred with the pattern. Cold and hot tear release agent: the release film is translucent, the release surface is bright, and the hot stamping temperature is between 120 and 220 degrees.

Matters needing attention:

A. 60 degree drying is recommended for release agent drying to improve the adhesion, scratch resistance, solvent resistance and release ability of release film.

B. Transfer of cold and hot tear type agent to PET to hot tear to smooth and cold tear to light; Hot strip paper to smooth, cold tear to matte.

C. Due to the high solid content of the original release agent, it can be diluted with the opening agent and used again. The dilution ratio of cold avulsion type release agent is 2:1. The dilution ratio of hot avulsion type release agent is 1:1. The release agent with diluent must be stirred evenly before use.

D. It is advisable to use 250-350 mesh screen, can be printed per kilogram of about 130 ㎡, printed twice is preferred.