Wide format heat press machine, also known as roller heating machine, is used to transfer dye-sublimation prints onto a fabric. Heat tube is a very important part of the machine. But, do you know how to replace heating tube of the machine? This article will introduce steps.
1. Open manhole on both ends of the calender heat press.
2.Loosen heating tube screw machine copper connections.
3.Draw out heating tube of the rotary heat press machine.
4.Check new heating pipe ends are tight insulation ceramics.
5.Insert new heating pipes, heating tube ends and check out the distance of the cylinder is consistent.
6.Fixed the heating pipes, in making ceramics, copper and connected.
7.Above steps needed to change in turn with heating tube.
8.Replace all hair after heat pipe, check again for all the screws are tight.
Warning when we are replacing the heat tube:
1.Machine drum are high temperature, do not touch, in case of scald!
2.Machine operation process, the workbench please avoid placing any sundry, lest enter roller, damage the machine!
3.Around the the roller heating machine should avoid pile up any flammable items.
4.Specially trained personnel electrician to repair the wide format heat press machine.
FY Series Roller –type sublimation thermal transfer printing equipment, the use of heat-conducting oil layer surrounding electric heating diversion of the principles of design and manufacture of heating, the cylinder surface temperature balanced and stable blanket with out of the mechanical structure, with three-phase frequency control devices, machine operation, easy maintenance, transfer to achieve the best and widely used in digital printing industry at home and abroad. Sublistar is a roller heat press machine manufacturer with over 10 years of experience producing heat transfer machine. Any question or need, please contact us. Our team will provide you with the best service. Thank you for your reading.