• 86-15850596034
  • feiyuedigitalinc@gmail.com

Tips that Should You Take Care When Using Rotary Heat Press

Tips that Should You Take Care When Using Rotary Heat Press

 

 

As we can see that now rotary heat press are important for sublimation fabric printing business, our company provides instructions to customers, installation and commissioning, parameter setting, fault diagnosis and operation of the use of the relevant matters needing attention, please keep it properly, today we share you some tips you should take care.

Fabric heat press

Fabric heat press

Before installation and commissioning the fabric roll to roll heat press, please read the instructions carefully so as not to cause the loss of equipment and even personal safety accidents due to mis-operation. The user must select the power supply wire and install the special leakage protection switch according to the rated power.

 

Before starting the heat pressing must be connected to the ground, otherwise it may cause serious personal safety accidents. The machine must be installed in a ventilated, bright place, not less than 1.5 meters around the machine, vertical installation;

 

In the event of abnormal situation should immediately stop check. At the same time should be the blanket and off the drum, and use the fan to help heat and cooling, to prevent blankets due to high temperature damage. Operators must strictly comply with the prohibition signs of all parts of the machine.

textile heat press machine

textile heat press machine

Because roller heat transfer machine is thermal mechanical, so in the process of using, roller or heating tube and the size of the bearing may be due to thermal expansion will make some noise, which is the normal phenomenon, don’t panic.

 

Sublicalcender is professional heat transfer machine manufacturer in China. We can provide you high quality heat press machine with different width and length, if any needs, pls feel free to contact us!

admin

Leave your message