Share You the Key Factors for Choosing A Rotary Heat Press
Heat press machine are hot now, today we will share you 2 tips that will good for you using the heat press, two key factors when choosing a rotary press machine are the diameter and the width of the drum. Drums can vary in diameter from 20 cm to 2 m+; and the wider the diameter of the drum, the higher the press’s production speed. This is because the substrate needs to be in contact with the heated drum for an average of 40 seconds to achieve effective sublimation. This means that it can pass twice as quickly over a 40 cm drum compared with a 20 cm drum due to the larger contact area.
heat press machine
There is also a wide range of drum widths available, from 400 mm (working width) to 5000 mm+. It makes sense to match the width of the drum to the width of your printer; or you could opt for a wider drum to future-proof your investment in the event that you move up to a wider printer at a later date.
heat press machine
In terms of production speed, that a rotary heat press with a 35 cm drum will keep pace with two or three Mimaki JV33, TS34 or Epson 7000 printers. Traditionally, presses run much faster than the printers; however things are beginning to change with more productive digital printers coming onto market. We have a printer that can print at up 400 m square per hour; you would need a 1 m drum heat press to keep up with it.
heat press machine
The sports style or rotary press, which incorporates an automated table at the front, is an especially versatile choice, as it enables the continuous printing of single panels pieces as well as conventional roll-to-roll sublimation.
