This kind of blanket is made of 100% Nomex fiber which is available for the rotary heat transfer machine. The calender printing felt could work on high temperatures to ensure carries the dyestuffs press the pattern on the fabric from printed paper clearly when pre-printed.
What is the Felt?
Roll to roll transfer printing machine used Industry Endless blanket have a relatively high temperature resistance, our belt have two specification: 160-180℃ and 230-260℃. All of the felt belt could meet the different needs of different customers. The interior of the blanket is specially added with a kind of base cloth which are made of endless industrial silk, which can ensure that the blanket does not run out of position after being machined, does not arch up, has a long service life, and the shrinkage rate is controlled at about 2%.
How to Protect the Blanket?
(1. Work abnormal conditions should immediately stop the check. While the blanket out of the drum, cooling fan to help prevent damage to the carpet belt.
(2. After the end of the transfer work, turn off the “heat” button of roller heating machine, and turn the hand wheel to the blanket out of the drum, the machine stops heating when the temperature dropped to 100 ° C and can turn off the host.
(3. A power outage or staff leave work shall be pneumatic pressure silicon roller lift to prevent burning or scalding blanket.
( Warning: Machine power failure or the operator leave, without shaft lift pressure cloth, likely to cause a burning of blanket.)
Okay, These all above are my share about the knowledge of rotary heat transfer machine blanket. If you have any other needs or questions welcome to contact us at any time. We will provide you the best quality product and service. Hope my article can be useful to you. Thank you for your reading.
