Ribbon heat press machine is a multi-functional printing machine that can be applied for ribbon printing, cutting and cloth rolling. Moreover,it is a new generation of roller sublimation heat transfer machine researched and developed by our senior with tri-location, accurate positioning, and prints with a couple of ribbons simultaneously in whole roll, thus to get a clear printing result. And, this post will share how to use ribbon heat press machine.
1. Turn on the power press the start button until the rope from the conduction band to send the heat press machine, check whether the patterns with the direction, diameter, etc., to be in line with the requirements, the process speed to the rotational speed of the position;
2. Product quality inspection;
3. The surface should be smooth with no defect, error-free yarn, less yarn, colored flowers, hemp belt, flat belt, stretching, insufficient diameter;
4. Check the operation of the machine, the plastic wire view, weft winding operation condition;
Holding above operation until the finished product.
Ribbon sublimation rotary heat press machine notes:
1. Those who want to use electrical things should guarantee its insulation performance is good, so the weaving ribbon heat press machine should be interpolated using a three-wire power source as the channel that contacts the ground should be kept intact, the power supply voltage and current should follow the instructions strictly comply with the instructions;
2. After the boot should first check all the machines, the device can be operated normally;
3. When no operation should promptly disconnect the power, when people leave the machine should cut off the power;
We are machine manufacturer with over 10 years of experience producing heat transfer machine. The company utilizes the knowledge and experience obtained through years of involvement and puts it into research & development, innovation and design. Any question, please contact us. Thank you for your reading.
