How to Repair Your Calender Drum Heat Press Machine if it Break down?(01)
In the process of heat transfer, you must meet a lot of problems about how to
operate it. The principle of heat press machine is to use the high pressure and
temperature to transfer the patterns from the sublimation paper onto the fabric
or some other material you want. So if your calender drum heat press machine
is breakdown, you should try to repair it at the first time. Or it will be very
dangerous if it keep working.
While the breakdown of the Calender drum heat press machine can be divided
into the un-stop working breakdown and the stop working breakdown. And
today I will share you about how to repair your drum heat press machine in the
two different situations.
Un-stop working breakdown handing
A. Found that the roller engraving embedded in a small amount of paste piece
of grain or fluffy stuff, etc, could use small copper wire brushes brush away at
the roller point. If it doesn’t brush away, stop the heat press machine working
and then removed it.
B. Found very fine stripes on the roller surface. Could use small fine stone
roughing it at the roller point, if it doesn’t roughing, stop the machine working
and send it to the carving workshop repair.It’s rarely found this breakdown in
chrome plated roller.
C. If you found the depth color is different between both sides and middle
place, could adjust the pressure on both sides, or adjust the spacing between
axis and roller, don’t to make it too much tight.
D. If you found the axis, roller or other parts are loosing by strenuous
vibration, you should fasten the screw and nut in time.
E. If you found mis-pattern, could adjust it by machine working slowly .
F. When the blanket is shifting, could adjust it by pull the chain wheel to
assigned position.
G. When found the cloth has staining situation, should turn big the drying
steam valve, to increase the steam temperature and the cloth dryness.
H. When found the cloth or blanket tension is too big or too small, should
adjust the speed between units or tension device in time, make sure supply
proper tension.
I. When the moisture of Water scrubbing cloth sides is unevenness , could
adjust the axis sides pressure.
Okay, These above are my share about how to solve the problem if your
Calender drum heat press machine is breakdown in the un-stop situation. If you
have any need or questions welcome to contact us at any time. We will provide
you with the best quality product and service. Hope my article can be useful to
you. Thank you for your reading.
Whatsapp:+8618752006819
Facebook: Fei Yue Paper Industrial Co.,Ltd
Email:zeo@feiyuepaper.com