• 86-15850596034
  • feiyuedigitalinc@gmail.com

How to Operation Roll to Roll Heat Press Machine?

How to Operation Roll to Roll Heat Press Machine?

Roll to roll heat press machine multifunction smart energy-saving technology, intelligent controller, auto repair flatness and other advanced technology, goodtemperature stability, temperature balance, simple operation; excellent quality,manufactured from a professional; win the market, beer from customers; high stability, high quality results, is the key to digital printing and artwork copy!

Tell you about the following simple method of operation multifunction roller heat press machine:

roll to roll heat press machine

1. Make sure the machine is well grounded and power connections are correct, thenpress the “Power” button, then press the start button frequency, press the green buttonon the fixed line frequency keyboard, the frequency modulation in the appropriateposition;

2. Verify that the heating cylinder is rotated after pressing the “heating” button, thetemperature is set at an appropriate value, when the temperature is applied to the setvalue, wait for the temperature controller since the entire thermostat, do a little test,the detected temperature is too high or too low to do the adjustment, to ensure thequality of a large number of transfer;

3. In the pre-transfer, should put pressure on the host Cots pressed against blanketbelt, pay attention to the same pressure on both sides;

4. On the table and host pressing the corresponding position paper flowers and putaway the liner, then put pieces of clothing or a piece of cloth;

5. When backing transferred host, put it on the wound after the host Shaft, let automatic winding, the pieces of clothing or piece of cloth exported in the conveyorbelt;

6. In the transfer process, the customer can turn the barrel, according to the printedpattern color depth to adjust the level of speed, but also adjust the operating speed ofthe drum;

7. After the transfer of work, should be turned off “heating” button, so that the hostrotary cooling, cooling temperature to transfer half of the temperature, it can shut down, someone turned on the machine must do their duties, if they are a special case,the “total power” and “warm” buttons simultaneously to switch off, when the host isin automatic cooling state, will stop on its own fixed line to a certain time;

rotary heat transfer machine

8. When a power cut situation, and the machine and in the post-high-temperaturestate, turn the hand wheel at the top of the chassis immediately make blanket with heat from the cylinder, while blanket between the belt and the roller clamp oncardboard and other heat-resistant barrier article.

We FeiYue Digital Technology Co., Ltd mainly manages sublimation paper, inkjet printer, digital printing inks, calendering machines and accessories, operating digital printing industry has been more than 10 years experience. After continuous improvement of the product, to ensure product quality can also be profit at the same time to the minimum, to ensure that customers enjoy the best price and the best quality products.

admin

Leave your message