• 86-15850596034
  • feiyuedigitalinc@gmail.com

Method for Handling Malfunction of Roller Drum Heat Transfer Machine

Method for Handling Malfunction of Roller Drum Heat Transfer Machine

Method for Handling Malfunction of Roller Drum Heat Transfer Machine

sublimation roll heat pressWhen you are the usage of roller heat press machines, abruptly there is a malfunction, then how do you deal with the failure?

The heat transfer press machine is one of the digital transfer printing devices, which are divided into one of a kind sorts and fees in accordance with the diameter of the roller.

How to deal with the malfunction of the roller heat press machine:

1. When the cloth is printed, the head is broken due to terrible seam or excessive tension, and even if the material head is wrapped around different parts, a principal accident will show up and need to be stopped immediately.

2. If the shade paste is combined with impurities or the shade paste is too thick or too thin, if it does not meet the necessities for use, it should be stopped to pour the shade paste again into the pulp tank, and then adjusted and reused after filtration.

3. When the quantity of flower print is too much, the pattern is smoothed and exposed by way of the scraper. After stopping, the flower tube should be removed and despatched to the engraving workshop for restore or substitute for the new flower tube.

4. If the flower tube is used for a long time, the inner gap will be enlarged, inflicting the axis of the flower tube and the flower tube to loosen and the flower is now not correct. At this time, the flower tube must be removed, the kraft paper strip must be placed, and the paper should be re-tightened.

sublimation printing machines

5. When the rubber bearing roller is aged or cracked or the hardness is increased, the printing impact should be stopped, the flower cylinder ought to be unloaded, and the unique grinding and urgent curler tools ought to be mounted to grind the rubber bearing roller pores and skin to a layer.

6. When the surface of the rubber stress roller is pressed into a pit with the aid of a tough object, some of the printing may be unclear. It needs to be at once stopped and crammed with uncooked rubber to restore it: when the pit is shallow, the warm water can be used to make the pit.

7. When the tube bearing is damaged during operation and generates heat, when the motor load increases, do now not use bloodless water to pour the bearing. Stop immediately, replace the properly tube bearing, and add the grease to the well.

8. If there is too a lot of fiber fluff in the contact between the physician blade and the flower tube, after parking, use a damp fabric to tie the knot at one end, loosen the weight connected to the health practitioner blade, and take the other quit of the moist cloth from the knife edge. Drag it over so that you can wipe the knife.

The roll press machine is suitable for sublimation transfer of giant banners, flags, non-woven fabrics, garb fabrics, towels, sheets, mousepads, etc., especially for non-stop transfer of sheets of cloth.

★About us★

We are a sublimation paper professional supplier. Our company can supply any need for sublimation transfer paper, sublimation ink, printer, Epson ink, heat transfer paper, Roll calendar machine for textile printing!
More info visit www.feiyuepaper.com


Leave your message