Fei Yue Digital INC. multifunctional roller sublimation printing machine adopts full automatic ; When sudden shutdown or power failure, the blanket can be automatically detached, more effective protection of blankets, and prolong life; automatic control, high-quality digital display, time control, higher accuracy . So do you know about the daily maintenance of multi-function roller printing machine?
1. The daily switch is to check whether the power is on, whether the power is normal, and whether the ground connection is normal.
2. Routinely check the inside of the machine for dust, and wipe it off in time to keep every part clean;
3. Routinely check whether any metal or debris is accidentally dropped inside the drum and the blanket. If abnormalities are found, they must be handled first.
4. Routinely check the wiring of the wire to see if there is a burning phenomenon and it should be treated in time;
5. Sweep body shell frequency conversion radiation and dust;
6. Regularly inspect the periphery of the hood, if there are other things stacked up, keep it clean and ensure the motor cooling;
7. All bearings of the whole machine must add high-temperature butter once a week to ensure the normal operation of the bearing;
8. Emergency stop switch, during the use of the emergency stop switch on the drum printing machine to be used as little as possible, emergency stop can not exceed 3 minutes.
9. Always check if there is aging in the wires, circuits, etc.
10. Each time the machine is started, the oil is added to all parts of the machine; the heat transfer oil needs to be added regularly.
11. Clean the machine every week.
Okay, these all above are my share about the operation flow of maintain your roll sublimation machine. If you have any other needs or questions welcome to contact us at any time. We will provide you the best quality product and service. Hope my article can be useful to you. Thank you for your reading.
