Do you know how to maintain the roller heat transfer machine? Here’re the tips to maintain your roll to roll heat press:
1.To inspect the power supply if power on or not and the ground wire whether normal.
2.To inspect the heat press machine inside if clean or not,which need to be keeping clean.
3.To inspect the roller and blanket inside regularly which whether there are sheetmetal and sundries fall into ,abnormal condition need to be handled in advance when there are exceptional conditions.
4.To inspect the wire connection whether there are combustion phenomena and need to be settled in time.
5.Clear away variable frequency radiation of fuselage cover and dust.
6.To inspect regularly the cover around of engine, if accumulating stuff ,which should keep clean and insure the motor cooling in time .
7.All the bearings of machine need to be add hot butter within one week to insure the bearings function well.
8.Emergency stop switch of the roller heat press should be used less as far as possible ,stutter stop not exceeding 3 minutes.
9.To inspect frequently the electric wire ,circuit whether from aging.
10.Add butter for each part of machine,when it start up each time, and conduction oil should be added regularly.
Okay, these all above are my share about the tips to maintain your roll to roll heat press. If you have any other needs or questions welcome to contact us at any time. We will provide you the best quality product and service. Thanks for your reading.