Do You Know How to Install The Blanket of The Calender Heat Transfer Machine?
The blanket is a very important part for the calender heat transfer machine. It can help you adjust the right direction of the sublimation paper and textile. In case of the transfer ghosting in the transfer result. So have a right installation and replacement of the blanket in very important. Today I will share you the tips about how to install it in a right way.
1. The blanket is fixed on the surface of the roller, the shaft passes through the blanket, blanket clip in the fixing groove, rotating loose tight ring hard blanket, blanket adjustment looseness, the lower through another shaft, and then tighten the screws, fixed shaft, check the blanket on both sides of the width.
2. The machine blanket in the installation process must maintain a level, the other end of the anchor bolt machine level method can use the base 1 and 2, the height of the plate needs to be placed on both sides, such as h, B2, B3 and B4.
3.The level in the base on the surface to find the balance point, when the base was in two directions, tighten the anchor bolts 1 and 2
4. In the 3 and 4 people on both sides of the anchor bolt plate, using the same method of leveling point, find the balance and then tighten the anchor bolts 3 and 4, this seat is installed. This method in the construction site S for three points to find the balance point loading method.
Okay, These all above are my share about how to install the blanket of the calender heat transfer machine in a right way and some attentions that you should take care. If you have any other needs or questions welcome to contact us at any time. We will provide you with the best quality product and service. Hope my article can be useful to you. Thank you for your reading.
Whatsapp:+8618752006819
Email:zeo@feiyuepaper.com
Facebook: Fei Yue Paper Industrial Co.,Ltd
