• 86-15850596034
  • feiyuedigitalinc@gmail.com

How to Operate A Large Format Dye Sublimation Calender?

How to Operate A Large Format Dye Sublimation Calender?

A large format dye sublimation calender is different from platen heat press machine,which is easy to operate. Incorrect use of industrial calender heat press may cause damage to the machine or other accident occurs. Therefore, today we are going to introduce about how to operate the wide format roller heating machine.

dye sublimation calender

Check before starting the mechanical transmission part is normal, then lift the feed pressure stick, the tone is just the blanket with the tension, until the temperature for the temperature of your work will commence its work.

1) Make sure the body is well grounded and power wiring is correct, onto the chassis circuit breaker, then press the “power” button of heat transfer machine, and then press the “run” button in the inverter control panel, the frequency modulation in the appropriate position.

rotary heat transfer machine 2) Press the “heating” button, set the desired temperature, the data rely on the customers according to the different composition of the fabric. I plant suggested that the first small piece of fabric and transfer paper transfer, the client reaches the set temperature. If the temperature is too high and too low, can be adjusted accordingly, in order to ensure the quality of a substantial transfer of goods.

3) In the workbench put cloth frame and put the paper rack to put away the fabric and transfer paper, the temperature of the transfer effect, the fabric flat clothing pulled up to the board, put down the pressure stick into the drum. Note that the transfer paper ink the face of the fabric, the fabric above.

4) In the transfer process, customers can turn shades of the printed pattern to adjust the temperature increase or decrease, but also adjust the speed of the cylinder to control.

5) After the end of the transfer work, turn off the “heat” button of dye sublimation calender, and turn the hand wheel to the blanket out of the drum, the machine stops heating when the temperature dropped to 100 ° C and can turn off the host.

rotary heat press 6) Special circumstances, you can turn off the “power” and “heating” button, will automatically shut down when the host is running after a certain time, under normal circumstances is not recommended to use this feature.

7) A power outage or staff leave work shall be pneumatic pressure silicon roller lift to prevent burning or scalding blanket of rotary heat transfer machine.

Any question or need, welcome to contact us. Thank you for your reading.

 

admin

Leave your message