• 86-15850596034
  • feiyuedigitalinc@gmail.com

What Should We Care for When Use the Sublimation Heat Press Machine?

What Should We Care for When Use the Sublimation Heat Press Machine?

As we know, sublimation heat press machine is necessary machine for subliamtion printing market during digital transfering. But you know what should we care for when use the sublimation heat press machine? I know that some people don’t learn about the question! It doesn’t matter, here I would like to introduce three points to you, then you will know the answer.

1. Temperature and time

Sublimation transfer process requires temperature control in the 180 ℃ ~ 230 ℃ range, the time is about 10 ~ 30s, while paying attention to the reasonable allocation of temperature and time.

2. Sublimation ink

Sublimation transfer technology, the key material mainly by disperse dyes, connecting materials, solvents and a small amount of additives. Dyes should have good sublimation transferability and permeability. And reached a certain degree of fastness indicators, molecular weight of 23O ~ 380, sublimation temperature of 180 ℃ ~ 240 ℃ commonly used transfer printing dye anthraquinone dyes, azo dyes and cationic dyes and so on.

The connection material to the dye with a small affinity, easy to release dye gas, and the appropriate printability, preservation and thermal transfer adaptability, commonly used in the connection material for the low viscosity of ethyl cellulose, ethyl ethyl cellulose (EHEC), long oil modified alkyd resin. Commonly used solvents are turpentine, terpineol, high boiling alkanol, aralkane, cellosolve and so on.

3. Pressure

Pressure is also one of the important parameters of the sublimation transfer process. For example, if the pressure is too small, the gap between the fabric and the transfer paper is large, the yarn is round, the ink gas molecules collide with the air and escape, resulting in poor printing effect, while the ink is also easy But the pressure is appropriate, the yarn is flat and the transfer paper between the gap is appropriate, the transfer coloring effect is good, clear pattern, smooth lines Fine: If the pressure is too large, it is prone to deformation, fluff and heavy fabric morphological changes and other issues, resulting in rough and color rendering and other shortcomings. Therefore, the control of the transfer pressure on the printed pattern, clear pattern, visual effects and so very critical.

That’s all, these all above are my share about the introduction of using oil drum heat press machine. If you have any other needs or questions welcome to contact us at any time. We will provide you the best quality product and service. Hope my article can be useful to you. Thank you for your reading.


Leave your message