• 86-15850596034
  • feiyuedigitalinc@gmail.com

Roller Heat Press Machine Maintenance Tips

Roller Heat Press Machine Maintenance Tips

Here’re a few tips to maintain your roller heat transfer machine. Hope will be helpful for you.

1.Be sure always to lubricate all the bearings of the machine.

2.Regularly clean the dust from all accessories of the machine.

3.If you find dust in the circuit board as well as in the fans, considering blowing the dust with an air gun.

4.After a few months of usage, you might find the oil tank empty. Consider refueling the tank before it interrupts operation.

5.You can only refuel the tank with 3 liters of oil at a time.

6.Before starting the machine, pour the fuel into the tank. Don’t heat it yet. Before heating the machine up, allow the oil flows into the bottom of the tank. Wait until the temperature reaches to check whether there is any oil in the tank or not.

7.When you use the turbine reducer, pay close attention to the instruction manual. After using it for a long time, there can be some noise.

8.Consider replacing the oil frequently. Remove and screws and release the oil and replace it with the same amount of oil. It’s recommended to replace the oil after 200 hours of working to ensure a constant flow of work.

9.If you involve the machine in long high-temperature operations, it might leak a small amount of oil; don’t freak out, it’s quite normal.

We FeiYue Digital Technology Co., Ltd mainly manages sublimation paper, inkjet printer, digital printing inks, calendering machines and accessories, operating digital printing industry has been more than 10 years experience. After continuous improvement of the product, to ensure product quality can also be profit at the same time to the minimum, to ensure that customers enjoy the best price and the best quality products.

admin

Leave your message