• 86-025-86628894
  • sales@sublicalender.com

How to use the heat transfer printing machine skillfully?

How to use the heat transfer printing machine skillfully?

In today’s printing industry, the technology is more and more new, and people’s ability to innovate is also increasing. The appearance of more printing machines perfectly meets the hot demand of the market at present, and the heat transfer printing machine is the printing equipment which is born with the trend.

Rotary printing machine process has a brilliant solution.

First,turn on the switch, press the general power button, the power indicator is on, turn on the heating switch, the green light of the temperature controller is on, and the machine starts to heat up.

Second, temperature setting.

1. Check the setting of the dial code before starting up the machine to prevent the blanket from burning due to artificially high setting

2. The temperature controller dial decoder digital dial in below 250 ° C, little green light to start automatic temperature control.

3. When the temperature reached around 250 ° C, red light says working temperature is to transfer.

4. Turn on the motor switch, turn it forward, and turn the speed control knob slowly from left to right to the appropriate speed.

5. If the temperature is too low when printing, set the temperature to be raised appropriately, otherwise lower.

Third, power off processing: in order to ensure the finished printing, please turn the motor belt pulley after power off, and it can still be transferred at this time with the same effect (note that the speed should be consistent).

Fourth, in order to ensure the service life of the transfer printing blankets, every time after the transfer, please dispatch dial the decoder to below 95 ° C, the machines continue to roll, until the temperature fell to below 100 ° C, you can stop.

admin

Leave your message